A dish on the roof, a coin vendo on the wall, and a customer who has to leave halfway through a session. Starlink Piso WiFi pause is the vendo's Pause button doing its normal job on a satellite line: you stop your timer at 10.0.0.1 and pick it up later. The satellite part doesn't change the button. One trap comes with it, though, and we'll get to it.
Starlink Piso WiFi pause is the pause feature on a coin vendo that gets its internet from Starlink. You tap Pause on the 10.0.0.1 portal, your remaining minutes stop, and you resume later on the same phone. The dish plays no part in it.
Pause lives in the vendo's software. The owner's control board and portal hold your session, not the Starlink router. So a Starlink Piso WiFi pause behaves the same way it does on a fiber or LTE vendo.
That also means the usual limits apply. TP-Link Philippines says LPB vendos hold a paused session for 60 minutes by default, and owners can set anything from 10 minutes to 24 hours. Miss that window and the paused time is gone.
New to the satellite side? Our Starlink Piso WiFi setup guide covers the dish, the cabling and Starlink's resale terms.
How do you pause and resume your time on a Starlink vendo?
Stay on the vendo's WiFi, open 10.0.0.1, and tap Pause before you leave. To resume, rejoin the same WiFi on the same phone, open 10.0.0.1 again and tap Resume. Your saved minutes start counting down from where they stopped.
Connect to the vendo's WiFi network, not the Starlink router's own network. Check the name against the one shown on the vendo.
Open a browser and go to 10.0.0.1.
Tap Pause on the portal. Your timer stops.
When you're back, rejoin the same network on the same phone.
Open 10.0.0.1 and tap Resume.
Button names for a Starlink Piso WiFi pause change from one firmware to the next. One portal says Pause Time, another just says Pause. Our guide to the portal layout shows where each button tends to sit.
Want the long version with pictures? Our main guide walks through the pause and resume steps one screen at a time. Every one of them works the same for a Starlink Piso WiFi pause.
Does Starlink change how Piso WiFi pause time works?
No. Starlink only supplies the internet line. The vendo's board runs the timer, the portal and the pause limit. Paused minutes stay on the vendo, matched to your phone's IP or MAC address, whether the line comes from a dish, fiber or a SIM.
Here's the thing. The vendo knows you by device, not by name. TP-Link Philippines says sessions are matched by IP or MAC address, so the phone that paused is the phone that resumes.
And the Starlink app can't see your minutes. The app manages the dish and the Starlink router. Rates and pause settings sit in the vendo's own admin page.
Put simply, a Starlink Piso WiFi pause stops the vendo's clock. The dish keeps running either way.
Why does Starlink Piso WiFi pause stop working?
On a Starlink vendo, one cause is special: the phone joined the Starlink router's own WiFi instead of the vendo's. The others are the same as anywhere: a changed phone address, an expired pause, a different phone, or pause turned off.
Why two networks? The Starlink router sends out its own WiFi unless the owner switches on Bypass mode. DishyTech's guide says Bypass mode turns off the Starlink WiFi and its DHCP, so only the vendo's network is left.
Join the Starlink network by mistake and 10.0.0.1 won't show the vendo portal. Your Starlink Piso WiFi pause isn't lost, though. Switch back to the vendo's network and open the portal again.
Quick checks when a Starlink Piso WiFi pause fails
What you see
Why it happens
What to do
10.0.0.1 won't load
Your phone is on the Starlink router's WiFi
Rejoin the vendo's network
Resume shows no time left
The pause window ran out (60 minutes by default on LPB)
Ask the owner about the pause limit
No Resume on a second phone
The session is tied to the first phone's IP or MAC address
Resume on the phone that paused
iPhone resumes with no session
The phone's private Wi-Fi address changed
Set Private Wi-Fi Address to Fixed for the vendo network
No Pause button at all
The owner turned pause off
Nothing to fix on your phone
Still stuck after these checks? Our list of pause fixes goes deeper, from browser settings to cached portal pages.
What should owners set up for pause on a Starlink vendo?
Turn on pause in the vendo's admin page at 10.0.0.1/admin, pick a pause limit, and switch the Starlink router to Bypass mode. Then check Starlink's terms: reselling on a residential plan breaks them, so a Priority Plan is the safe choice.
Pause limit: LPB lets a Starlink Piso WiFi pause run from 10 minutes to 24 hours, with 60 minutes as the default (TP-Link Philippines).
Bypass mode: set it in the Starlink app under Settings. A Gen 2 router needs Starlink's Ethernet adapter first (DishyTech).
Undo: a factory reset brings the Starlink WiFi back. Press the reset button on Gen 3, or power-cycle Gen 2 six times in a row.
Plan: Starlink's Philippine terms allow community WiFi resale only on a Priority Plan.
Our take? Pick a limit, then tell customers what it is. A note on the vendo that says how long a Starlink Piso WiFi pause holds will save you a pile of complaints.
Where does this information come from?
TP-Link Philippines covers pause limits and session matching. DishyTech covers Bypass mode and router resets, Starlink's own Philippine terms cover resale, Circuitrocks covers the admin page, and Apple covers private Wi-Fi addresses. Each source is linked below.
What else do people ask about Starlink Piso WiFi pause?
These six short answers cover pausing on one phone and resuming on another, the Starlink app, how long a pause lasts, the extra WiFi network, line speed, and what a missing Resume button means. Each answer takes one or two sentences.
Starlink Piso WiFi pause FAQs
Can I pause on one phone and resume on another?
No. The vendo ties your session to the phone's IP or MAC address, so resume on the phone that paused.
Can I pause my time from the Starlink app?
No. The Starlink app manages the dish and router, while Pause sits on the vendo's portal at 10.0.0.1.
How long does a Starlink Piso WiFi pause last?
As long as the owner sets. On LPB vendos the default is 60 minutes, and owners can choose 10 minutes to 24 hours.
Why do I see two WiFi networks at a Starlink vendo?
The Starlink router is still sending out its own WiFi. Join the vendo's network, and ask the owner to switch on Bypass mode.
Does a slow Starlink line use up my paused minutes?
No. Paused minutes are stored on the vendo, and the timer stays stopped until you tap Resume.
What does a missing Resume button mean?
Either the owner turned pause off or your pause window ended. Ask the owner, since the setting lives in their admin page.
Which Starlink Piso WiFi guides should you read next?
Go back to the Starlink hub for the dish setup, Bypass mode and the resale terms, or read the main pause guide for the full steps with pictures. Together they cover the owner side and the customer side of a Starlink vendo.
